Notes on Using Cranes

Notes on Using Cranes, Gantry Cranes

There must be a free passage for the operator of the lifting equipment when operating with buttons from the ground or the floor and when the Crane, Mobile Gantry Crane is working, the entrances and exits to the rails must be barrier.According to safety procedures, it is most necessary to ban people on the corridors of the Crane, Cantilever Gate while they are in operation.

It is only allowed to carry out cleaning, grease, repair work on the Crane, Gantry when taking measures to ensure safe work (prevention of falling, electric shock, etc.) and organize the implementation of a signal exchange system between the load tier and the operator of the lifting equipment. Always monitor well the signals used must be specified and cannot be confused with other phenomena. around.

When the user of the Crane device, the Gantry crane does not see the load during the process of lifting and moving the load, a signal person must be arranged. Before lifting the load to approximate the load, the load must be lifted to not more than 300mm high, hold the load at that height to check the brakes, strength of metal structure and stability of Crane, Gantry.

During certain operations, if safety is not guaranteed, the load must be lowered for handling. When lifting and transferring loads near constructions and equipment, obstacles, the safety of works and equipment must be ensured. … and those near them. The equipment for lifting Cranes and Gantry Cranes working outdoors must stop working when the wind speed is higher than the allowable wind speed according to the design of such equipment. For Cranes, Gantry Cranes working outdoors, it is not allowed. hang posters, posters, slogans or shields to increase the wind resistance area of the Crane, Gantry. Must tighten rail clamping devices, anti-self-moving devices of cranes, gantry cranes, gantry cranes at the end of work or when the wind speed exceeds the allowable wind speed. When there is a storm, there must be additional reinforcement measures for the above cranes.

SOME PICTURES OF CONSTRUCTION OF CRANES AND GATE EQUIPMENT THAT THUAN THANH MECHANICAL COMPANY HAS COMPLETED AND PUT IT USED:

If your company has needs, please contact Thuan Thanh Mechanical:

Technical advice. Master - Engineer: Nguyen Van Thuan - Mobile: 0913.936.176 - 0907.888.003

Email: [email protected];  web: www.cokhithuanthanh.com

Our products always meet your expectations well!

Tag : Thiết bị Palang  ;   Cầu Trục ; Cẩu trục ; Xây dựng nhà xưởng ; CẦU TRỤC, CỔNG TRỤC ; Cầu trục dầm đơn ; Cổng trục dầm đôi ; Cầu trục dầm đôi ; Thi Công Cầu Trục ; 

Palang điện cáp thân thấp ; Palang điện cáp Dầm Đôi ; Tời nâng mini ;