How to use Gantry Crane Safely
How to use Gantry Crane Safely
All cranes and gantry cranes on the list of lifting machines, lifting equipment... that have safety requirements according to state regulations must be registered and tested before being put into control. operate . More attention is that the user unit is only allowed to use crane and gantry crane equipment with good technical condition, which has been registered and has a valid inspection period.
It is not allowed to use crane and gantry lifting equipment and load-carrying parts that have not been inspected, tested and not yet registered for use, besides when using cranes and gantry cranes we are only allowed to position crane and gantry equipment operators who have been trained and certified to operate cranes and gantry cranes. Those who tie the load hook, signal must be professional workers, or other workers but must be trained. Workers operating cranes and gantry cranes must have a firm grasp of the technical characteristics and functions of the structural parts of the equipment, and at the same time master the safety requirements during the use of the equipment and we are only allowed to use crane and gantry equipment in accordance with the features, effects and technical characteristics of the equipment specified by the manufacturer. It is not allowed to lift loads with a mass exceeding the capacity of crane and gantry lifting equipment.
For safety reasons, it is not allowed to use cranes and gantry cranes with lifting mechanisms that can be opened and closed by friction clutches or clutches, actuators for lifting and moving people, and liquid metal. , explosives, poisons, canisters of compressed air or compressed liquids. It is only allowed to transfer loads by crane and gantry cranes in workshops, houses or places with people when there are separate safety measures. specifically eliminate the possibility of causing incidents and occupational accidents.
During the installation of cranes and gantry cranes, only two or more crane and gantry lifting devices should be used to lift the same load in special cases, and safety solutions must be calculated and approved. The load distributed on each crane and gantry device should not exceed the tonnage.
In the safety solution, there must be a diagram to tie the load hook, a diagram to move the load and specify the sequence of operations, size requirements, materials and manufacturing technology of auxiliary equipment to hook the load. . Must assign responsibility to someone who has experience in lifting and transferring cranes and gantry cranes during the lifting process.
SOME PICTURES OF CONSTRUCTION OF CRANES AND GATE EQUIPMENT THAT THUAN THANH MECHANICAL COMPANY HAS COMPLETED AND PUT IT USED:
If your company has needs, please contact Thuan Thanh Mechanical:
Technical advice. Master - Engineer: Nguyen Van Thuan; Mobile: 0913.936.176 - 0907.888.003
Email: [email protected]; web: www.cokhithuanthanh.com.
Our products always meet your expectations well!
Tag : Thiết bị Palang ; Cầu Trục ; Cẩu trục ; Xây dựng nhà xưởng ; CẦU TRỤC, CỔNG TRỤC ; Cầu trục dầm đơn ; Cổng trục dầm đôi ; Cầu trục dầm đôi ; Thi Công Cầu Trục ;
Palang điện cáp thân thấp ; Palang điện cáp Dầm Đôi ; Tời nâng mini ;pa lăng ; cổng trục